Description

Product Overview

CAMTOP TPD600 Триплексный насос is a 600 HP rated, three-plunger positive displacement pump designed for high-pressure well service applications including cementing, acidizing, and stimulation. Its compact short-length frame allows back-to-back placement of two pumps on a single unit with a total width of less than 102 inches, maximizing skid density for mobile well service fleets.

Manufactured with forged alloy steel mono-block fluid end, pressure-lubricated power end, and hard-coated plungers, the TPD600 delivers continuous duty performance at pressures up to 15,000 PSI (1,057 kg/cm²) and flow rates up to 605 GPM (2,289 LPM), depending on plunger diameter and stroke speed selection.

CAMTOP TPD600 Триплексный насос — 600 HP, 15,000 PSI max pressure, 605 GPM max flow, forged alloy steel fluid end, plunger sizes 3 to 4.5 inches, for cementing, acidizing and well stimulation services

Key Features & Advantages

Compact short-length frame — back-to-back mounting of two pumps fits within 102″ total skid width
Кованый alloy steel mono-block fluid end with removable stuffing box for easy maintenance
Клапан-over-valve fluid end design with replaceable wing-guided valves and urethane valve inserts
Pressure-lubricated wrist pins through the crankshaft for long bearing life under continuous duty
Ground and honed crosshead guides with proprietary crosshead coating for low wear
Hard-coated plungers with high-performance header-ring packing for extended sealing life
Left or right gear box mounting with 16 input drive positions for flexible installation
Fabricated steel suction manifold with Victaulic connections for fast field assembly
Center-gauge connection for real-time pressure monitoring
Four interchangeable plunger sizes (3″, 3.5″, 4″, 4.5″) cover flow rates from 28 to 605 GPM

Technical Specifications — Main

Parameter	Specification
Rated Max Brake Horsepower	600 BHP (448 kW)
Maximum Rod Load	10,000 lbf
Stroke Length	6″ (152.4 mm)
Шестерня Ratio	4.6:1
Plunger Diameter Range	3″ to 4.5″ (76.2 – 114.3 mm)
Насос Weight	4,600 lbs (2,086 kg)
Maximum Working Pressure	15,000 PSI (1,057 kg/cm²)
Maximum Flow Rate	605 GPM (2,289 LPM)
Гидравлическая часть Construction	Кованый alloy steel mono-block with removable stuffing box
Клапан Configuration	Клапан-over-valve, left or right side suction/discharge
Suction Connection	Fabricated steel manifold with Victaulic connections
Plunger Coating	Hard-coated for abrasive service
Drive Position Options	16 input drive positions

Intermittent Well Service Ratings

The TPD600 Триплексный насос delivers a wide range of flow and pressure combinations by changing plunger diameter and crank speed. Select the right configuration for your well service application.

Plunger Diameter in (mm)	Displacement per Rev Gal/Rev (L/Rev)	Input Power (BHP / kW)
		50 RPM (231)		100 RPM (461)		125 RPM (576)		162 RPM (746)		190 RPM (876)		225 RPM (1037)
		GPM (LPM)	PSIG (kg/cm²)	GPM (LPM)	PSIG (kg/cm²)	GPM (LPM)	PSIG (kg/cm²)	GPM (LPM)	PSIG (kg/cm²)	GPM (LPM)	PSIG (kg/cm²)	GPM (LPM)	PSIG (kg/cm²)
3 (76.2)	0.55 (2.1)	28 (104)	15000 (1057)	55 (208)	15000 (1057)	62 (234)	15000 (1057)	110 (417)	8402 (592)	193 (730)	4801 (338)	269 (1017)	3443 (243)
3½ (88.9)	0.75 (2.8)	37 (142)	11020 (777)	75 (284)	11020 (777)	84 (318)	11020 (777)	150 (568)	6173 (435)	262 (993)	3527 (249)	366 (1385)	2530 (178)
4 (101.6)	0.98 (3.7)	49 (185)	8438 (595)	98 (371)	8438 (595)	110 (415)	8437 (595)	196 (741)	4726 (333)	343 (1297)	2701 (190)	478 (1809)	1937 (136)
4½ (114.3)	1.24 (4.7)	62 (235)	6667 (470)	124 (469)	6667 (470)	139 (526)	6666 (470)	248 (938)	3734 (263)	434 (1642)	2134 (150)	605 (2289)	1530 (108)
Input Power BHP (kW):		268 (200)		536 (400)		600 (448)		600 (448)		600 (448)		600 (448)

Note: Maximum intermittent service pressure ratings are based on 100% volumetric efficiency. Plunger diameters from 3″ to 4½” cover a wide range of flow and pressure combinations for cementing, acidizing, and stimulation services.

Spare Parts Kits by Plunger Size

Each kit includes all fluid-end wear parts required for plunger servicing: plunger, packing, oil seals, O-rings, valve assembly, springs, and seat. Below are the five standard kit configurations.

Комплект — Spare Parts, TPD600, 2 3/4″

Part Description

Part Number

KIT, SPARE PARTS, TPD600, 2 3/4″

P60-00-906

Plunger (2.75″)

P60-27-006

Болт — Plunger Retaining

P60-34-015

Oil Уплотнение В сборе

P60-27-818

Combined Oil Уплотнение В сборе, 2.75″

P60-27-848

600 Насос Packing, 2.75″

P8T0005275

Packing В сборе, 2.750&#82

Описание

Буровой насос Манометр YK-100

YK series aseismic pressure gauges have good aseismic performance, and the damping mechanism inside the instrument has good damping effect on the pressure pulsation in the whole measuring range.
The instrument can not only measure the intense pulsating pressure with stable and clear indication, but also withstand the instantaneous pressure impact (such as sudden pressure unloading).
The instrument has the Особенность of preventing “plugging”. The measured Среда does not enter the inner part of the instrument, allowing the Среда to have high viscosity, high strength and easy solidification, such as mud.
Mainly used in oil production fracturing, cementing and other equipment supporting.
Technical parameters:
1. Models: yk-150, yk-100, and turntable yk-100b
2. Технические характеристики:
3. Accuracy grade
4. Other pressure units can be provided
5. Normal operating Температура окружающей среды of the instrument
6. Соединение thread

Description

Болт, P/N: 1198328 MP-5

We offer full lines of cylinder heads, valve lock covers, cylinder head threaded rings, cylinder head plugs, valve cover plugs, upper valve guides, lower valve guides, liner threaded rings, liner locks, wear plates, and much more. The parts are precisely made to meet or exceed API-7K standards, and they are 100% exchangeable with OEM pars of all major pump models.

Associated items include:

Suction and Discharge modules
Клапан and Цилиндр head plugs
Клапан and Цилиндр head thread rings
Клапан and Цилиндр headlocks
Клапан guides
Studs and nuts
Strainers
Rods: Поршень, Extension, Переводник
Wear Plates
Rod Clamps
Gaskets
Discharge Манифольд
Pulsation Dampener
Suction dampener
Safety/ Relief Клапан
Suction Манифольд
Power end components
Манифольд

Available Буровой насос Models:

Bomco: F-500, F-800/1000, F-1300/1600, F-1600HL, F-2200HL
HONGHUA: HHF-500, HHF-800, HHF-1000, HHF-1300, HHF-1600, HHF-1600HL, HHF-2200HL, 3NB-1300/1600F, 3NB-1600HL
Rongsheng: RS-F500, RS-F800/1000, RS-F1300/1600
Loadmaster: LSF-500, LSF-800, LSF-1000, LSF-1300, LSF-1600
RG: F-500, F-800, F-1000, F-1300, F-1600
Emsco: F-350, F-500, F-650, F-800, F-1000, FD-1000, FB-1300, FB-1600, FA-1600, FA-1300, FC-1600, FD-1600, FC-2200D-300/500
National: 7-P-50, 8-P-80, 9-P-100, 10-P-130, 12-P-160, 14-P-220, JWS-165-L, JWS-340, JWS-400
Oilwell: 350-PT, A-650P-T, A-850-PT, A-1100-PT, A-1400-PT, A-1700-PT
Ideco: T-500, T-800, T-1000, T-1300, T-1600, MM-450, MM-500-F, MM-600-A, MM-700-F, MM-1000
Gardner Denver: PZ-7, PZ-8, PZ-9, PZ-10, PZ-11TGE, TGF, TGH, PAH-275
LS National Mud Pumps: 3NB-500C, 3NB1000C, 3NB1300C, 3NB1600
Wirth Буровой насос: TPK1000, TPK1600, TPK 2000
Russian Pumps: UNBT-950, UNB-600, 8T-650, UNBT650, NBT600, UNB1180, UNB1180L,
WEATHERFORD/Ellis Williams: MP-5, MP-8, MP-10, MP-13, MP-16, E-447, E-2200, W446, W440
Drillmec: 7TS-600, 8T-800, 9T1000, 10T-1300, 12T1600, 14T-2200
Upetrom: 3PN-1000, 3PN-1600, 3PN-1300, 3PN-2000
OPI: 30-D, 350-GD, 500-DC, 700-HDL, 1000-HDL
Lewco/Ewco: W-250-C, WH440, W446, W600, WH600, WH770, W1100, WH1312, W1612, W1712, W2000, W2214, W2215
American Block: K800, K1000, K1300, K1600, K2200
Soilmec: 7T500, 7T508, 8T650
TFI: BH-800, F-500, F-800, F-1000, F-1300, F-1600
TSC: WF-400, WF-450, WF-700, WFU-750, WF-1000, WF-1300, WF-1600, WF-2000, WF-2200

Description

F-500 Буровой насос

Series Mud Pumps are manufactured under standard of API Spec 7k, mud pump parts at the fluid end are interchangeable with the parts that are in conformity with API Spec.
The suction pulsation dampener has an advanced structure which is reliable to use and can make the pump realize its best suction performance.
Performance of mud pump was greatly improved by durable fluid end; and examination, mud pump repair and mud pump maintenance are easier to make due to its independent structure.

F-500 mud pump specification

Model	F-500
Rated Power( kW/HP)	373/500
Type	Triplex Single-Acting
Strokes per minute	165
Stroke Length (mm/in)	191/7 1/2″
Max. Втулка Dia(mm/in)	170/6 3/4″
Шестерня Type	Herringbone Шестерня
Клапан Pot	API-5#
Шестерня Ratio	4.286:1
Dia of Suction Inlet(mm/in)	203/8″
Dia of Discharge Outlet	4″flange 5000psi
Dia. of Pinion Shaft(mm/in)	139.7(5 1/2)
Max Pressure Mpa/psi	27.2/3945
Overall Dimensions (mm/in)	365827092231 / 144″ 106″88″
Overall Dimensions (mm/in)	365827092231 / 144″ 106″88″
Weight kg(lb)	9770 (21540)

Описание

Буровой насос Манометр YK-150

Description

BOMCO drilling pump F-800

Модель: F-800
MAX. INPUT POWER :596kw
STROKE :229mm
RATED PUMP SPEED :140r/min
L*W*H: 3963*1607*1338
GEAR RATION: 4.185:1
OIL CAPCITY:233L

Модель	F 500	F 800	F1000	F 1300	F1600
Тип	Three cylinder single acting piston pump
Max cylinder dia / mm	170	170	170	180	180
Rated Мощность / KW	373	596	746	960	1180
Rated Stroke / spm	165	150	140	120	120
Stroke length / in	191	229	254	305	12” (305 mm)
Ratio of gear	4.286	4.185	4.207	4.206	4.206
Вес / KG	9,770	14,500	18,790	24,572	24,971

BOMCO F-800 Буровой насос performance
Втулка size / mm		170	160	150	140	130	120	110	100
Rated Давление / Mpa		13.8	15.6	17.7	20.3	23.6	27.7	33.0	34.5
Stroke / min	Rated Мощность / HP	Displacement L/S
160	853	41.51	36.77	32.32	28.15	24.27	20.68	17.38	14.36
150	800	38.92	34.47	30.30	26.39	22.76	19.39	16.29	13.47
140	747	36.32	32.17	28.28	24.63	21.24	18.10	15.21	12.57
130	693	33.73	29.88	26.26	22.87	19.72	16.81	14.12	11.67
120	640	31.13	27.58	24.24	21.11	18.21	15.51	13.03	10.77
110	587	28.54	25.28	22.22	19.35	16.69	14.22	11.95	9.87
1		0.2594	0.2298	0.2020	0.1759	0.1517	0.1293	0.1086	0.0898

Serial No.	Item	Part No.	Qty.
1	Масло Уплотнение 7.625″×9.125″×0.625″	AH080101-0311	2
2	Масло-seal Кольцо	AH080101-0404	3
3	Skelton Двойной-lip Уплотнение 4″×5″×0.5″	AH080101-0414	6
4	Capsule	AH080101-050601	1
5	Втулка Sealing	AH100101-0504	3
6	Клапан Bonnet Уплотнение	AH100101-0508	4
7	Поршень Уплотнение	AH100101-0515	3
8	Fixing Clip	AH100101-0521	3
9	Уплотнение Шайба	AH100101-09B1	2
10	Rataining Ringφ200×φ185×2.5	AH100101-210604	1
11	O-ring φ200×8.6	AH100101-210605	1
12	Rataining Ringφ80×φ70×2	AH100101-210606	1
13	O-ring φ80×5.7	AH100101-210607	1
14	Shear Палец	AH000006-0111	10
15	Cushion	AH000006-0709	1
16	Поршень В сборе	AH000006-010300	1
17	Air-bag	AK453501-0100	1
18	Backing Кольцо R39	T508-5001	2
19	Backing Кольцо R27	T508-5002	6
20	Backing Кольцо	T508-5003	4
21	Backing Кольцо R24	T508-5004	2
22	O-ring97.5×3.55NBR	530301010975035000	3
23	O-ring103×5.30NBR	5.30301E+17	3
24	O-ring290×7.00NBR	5.30301E+17	3
25	Уплотнение Шайба	AH080101-0415	3

Description

BOMCO drilling pump F-1600

Model: F-1600
MAX. INPUT POWER :1193kw(1600HP)
STROKE :305mm (12Inches)
RATED PUMP SPEED :120r/min
WEIGHT:27020KG(59570IBS)
L*W*H: 4875*3292*2900MM
GEAR RATION: 4.206:1
OIL CAPCITY:378LBOMCO drilling pump F-1600

Crankshaft В сборе Accessories Zone

No.	Item	Part No.	Qty.
1	Main Подшипник End Cap	AH130101-020100B2	2
2	Main Подшипник Sleeve (Right)	AH130101-0202	1
3	Уплотнение Washer	AH130101-0203	2
4	Internal Retaining Кольцо	AH130101-0204	2
5	External Rataining Кольцо	AH130101-020500B1	3
6	Connecting Rod	AH130101-0206	3
7	Locating Кольцо (I)	AH130101-0207	1
8	Hollow Crankshaft	AH130101-020800	1
9	Locating Кольцо (II)	AH130101-0209	1
10	Big Шестерня Кольцо	AH130101-021900	1
11	Rataining Кольцо	AH130101-0211	2
12	Main Подшипник Sleeve (Left)	AH130101-0212	1
13	Grip Кольцо	AH130101-0213	2
14	Baffle plate	AH130101-0214	2
15	Main Подшипник Болт	AH130101-0215	4
16	Прокладка Unit	AH130101-021600	1
17	Socket Head Cap Screw M16×120	T502-6006K	2
18	Болт M39×3	T507-2011	12
19	Main Подшипник Болт	T502-7003K	72
20	Болт M16×45-8.8-Zn.D	420201011116045000	28
21	Eccentric Подшипник	430129150464776000	3
22	Main Подшипник	430103002406000000	2
23	Washer 16-140HV-Zn.D	420501036160200000	28
24	Locking Wire Ф1.5	AH130101-020001	5
25	Locking Wire Ф3	AH130101-020002	1
26	Loctite Anaerobic Threadlockers Glue 243	170506010100243000	1
27	Socket Head Cap Screw M16×100	T502-6004K	2
28	Blot M39×3×180	T502-3008	12
29	Loctite Thread Anti-Seize Compounds 76759	170506040176759000	1
30	External teeth lock washers NL39 EN1.7182 flZn	420505032390180000	24

Description

The CAMTOP Триплексный насос Гидравлическая часть В сборе is a heavy-duty, three-cylinder reciprocating fluid-end module engineered for oil & gas well service applications including cementing, acidizing, fracturing and well-servicing mud circulation. The bolt-on fluid-end design accepts forged fluid-end bodies, plunger packing assemblies and the industry’s most field-serviceable valve cover geometry, allowing operators to swap suction and delivery valve kits without disturbing the manifold or crankshaft alignment.

This fluid end converts the rotary motion of the pump’s power end (crankshaft, connecting rods, crossheads) into reciprocating linear motion through three plungers, charging the suction manifold on each intake stroke and discharging pressurized fluid through the delivery manifold on each compression stroke. The CAMTOP design consolidates the Suction Манифольд, Delivery Манифольд В сборе, three Fluid-End Bodies, three Suction-Клапан Supports and three Клапан Крышка Assemblies into a single, fully interchangeable skid module that can be lifted, transported and replaced as a complete unit — a major advantage during remote operations where downtime is measured in thousands of dollars per hour.

Every fluid-end component shown in the BOM below is independently replaceable: from the delivery valve guide (P/N 01910943) to the spring-loaded valve insert (P/N 40630042), every wear-surface and sealing element uses standardized part numbers so operators can keep a small inventory of Клапан Комплект P/N 40390711 and Delivery Манифольд В сборе P/N 01923350 for rapid turnaround in the field. CAMTOP fluid-end assemblies are built to API 7K design standards and are fully compatible with the popular F-500 / F-800 / F-1300 / F-1600 triplex pump platforms.

CAMTOP Триплексный насос Гидравлическая часть В сборе — field installation of complete blue triplex mud pump module with red explosion-proof drive guard, suction and delivery manifold installed on common skid base — Figure 1 — Field-installed CAMTOP Триплексный насос Гидравлическая часть В сборе showing the Suction Манифольд (left), three Fluid-End Bodies, Delivery Манифольд В сборе (right) and the power-end drive guard.

Key Features

API 7K-Compliant Гидравлическая часть — Designed and manufactured to API Specification 7K for drilling and well-servicing fluid-end assemblies, with full material traceability and pressure-test certification.
3-Цилиндр Reciprocating Design — Three precision-machined Fluid-End Bodies (P/N 01921761) deliver smooth, low-pulsation flow ideal for sensitive downhole tools and cementing operations.
Болт-On, Field-Serviceable Architecture — Every suction and delivery valve cover is retained by studs (P/N 01921766 / 01921767 / 01921768) and accessed through the manifold — no torching, no specialised tools, no shaft alignment disturbance.
Complete Suction Манифольд (P/N 01921874) — Single-piece stainless-steel suction distribution manifold with three integrated Suction-Клапан Supports (P/N 01921792); eliminates the suction-side dead-leg that causes cavitation in inferior designs.
Replaceable Delivery Манифольд В сборе (P/N 01923350) — One-piece forged delivery manifold with built-in volume chamber to dampen pressure pulsation; replaceable as a single unit for rapid fluid-end swap.
Standardized Клапан Комплект (P/N 40390711) — Six sets of complete valve kits per fluid-end keeps three spare sets on the rig and one in the warehouse; includes Клапан, Клапан Седло, Пружина, Клапан Insert and Пружина — all drop-in interchangeable.
Bronze Клапан Guide (P/N 01910943, 3 required) — Precision-cast bronze delivery-valve guides provide wear-resistant seat alignment and extend valve life in abrasive fracturing slurries.
Race / Plug (P/N 01921762 / 01921763) — Hardened alloy race and tapered plug hold the valve seat concentric during pressure transients up to 7,500 psi operating surges.
Bushing (P/N 01911079) — Six oil-impregnated bushings absorb side-load on the plunger and reduce wear on the fluid-end cylinder bore.
Mirror-Polished Цилиндр Bores — Each fluid-end body bore is honed to within 8 Ra micro-inch to minimise plunger-packing wear and extend fluid-end service intervals.
Кованый, Heat-Treated Construction — All pressure-containing parts are forged from alloy steel (4140 / 4340 grade), quenched and tempered to API 7K Charpy impact requirements at -20°C.
Modular Skid Integration — Compact envelope accepts standard mud-pump skid bases and shares bolt patterns with the most popular 500-, 800-, 1,300- and 1,600-HP triplex pump geometries in service today.
Pressure-Tested to 1.5× Working Pressure — Every CAMTOP fluid-end assembly is hydrostatically tested at 1.5 times the rated working pressure before shipment, with full test certificate supplied.
Recommended Spares Package Available — CAMTOP offers a pre-packaged three-year spares kit (valves, seats, packings, plugs, studs) matched to your fluid-end serial number.

Technical Specifications

Parameter	Value
Product Designation	Триплексный насос Гидравлическая часть В сборе
Number of Cylinders	3 (Suction valve x3, Delivery valve x3)
Design Standard	API Spec 7K (Гидравлическая часть), ISO 10431 (related components)
Compatible Насос Platforms	F-500 / F-800 / F-1300 / F-1600 Triplex Mud Pumps
Гидравлическая часть Корпус (P/N 01921761)	Кованый alloy steel, 3 required, heat-treated
Suction Манифольд (P/N 01921874)	Кованый stainless steel, 1 piece
Delivery Манифольд В сборе (P/N 01923350)	Кованый carbon steel, 1 piece, pulsation-damped
Клапан Комплект (P/N 40390711)	6 sets supplied per fluid-end (3 suction + 3 delivery valve assemblies)
Клапан Комплект Переводник-Components	Клапан / Клапан seat / Пружина / Клапан insert / Пружина / Insert (7 sub-items)
Bronze Клапан Guide (P/N 01910943)	3 pieces, machined bronze
Suction Клапан Support (P/N 01921792)	3 pieces
Studs (Крышка / Корпус / Манифольд)	P/N 01921766 (12) / 01921767 (24) / 01921768 (12)
Nuts (P/N 01910255, 01920301, 01921769)	12 + 24 + 12 = 48 hex nuts total
Gaskets (P/N 01921782, 01921790, 01921791, 01921883)	3 + 3 + 3 + 3 = 12 gaskets
Bushings (P/N 01911079)	6 bronze oil-impregnated bushings
Plug (P/N 01921763)	3 hardened tapered plugs
Race (P/N 01921762)	3 hardened alloy races
Крышка (P/N 01921765)	3 valve-cover assemblies
Пружина (P/N 01920637)	3 valve-return springs
Fasteners (Screws / Пружина washers / Washers / Split pins)	P/N 70351611 (24) / 70371006 (12) / 70911625 (24) / 70981016 (12) / 71050610 (6)
Maximum Working Pressure	Up to 7,500 psi (per platform rating, consult CAMTOP engineering)
Hydrostatic Test Pressure	1.5 × Working Pressure (per API 7K)
Design Temperature Range	-20°C to +120°C operating
Approximate Dry Weight	1,800–2,400 kg (varies by spec)
Material Certificates	EN 10204 3.1 / 3.2 supplied on request

Bill of Materials — Триплексный насос Гидравлическая часть В сборе (Typical)

The following 26-position BOM lists every component supplied with a standard CAMTOP Триплексный насос Гидравлическая часть В сборе. Items marked ★ are pre-assembled sub-modules.

Position

Part Number

Qty

Description

Notes

01910255

Гайка

–

01910943

Delivery valve guide

–

01911079

Bushing

–

01920301

Гайка

–

01920637

Пружина

–

01921761

Fluid end body

–

01921762

Race

–

01921763

Plug

–

01921765

Крышка

–

01921766

Description

The RMKP-550 series triplex mud pumps are fully interchangeable with the equivalent OEM. Насос features a rigid steel fabricated frame with a casted suction manifold with a single front inlet or fabricated two-sided inlet. Discharge connection may be made from either side of the pump. Includes strainer block with pulsation dampener, mounted on a pony skid.

No.	Description	Qty	Part No.
	FRAME ASSEMBLY	1	RM-201PZG001A
1	FRAME	1	RM-201PZG001
2	PLUG-SqHd PIPE	2	RM-64A27
3	PLUG-SgHd PIPE	1	RM-64A9
4	STUD,Crosshead Inspection Plate	2	RM-79A238
5	NUT,Crosshead Inspection Шпилька	2	RM-50B5
6	PLUG-SqHd PIPE	1	RM-64A5
7	PLUG-MAGNETIC.Масло Drain	3	RM-66D13
8	STUD,Hood	2	RM-79A6
9	NUT,Hood Шпилька	2	RM-50B5
10	GASKET,Crosshead Inspection Plate	2	RM-PZ715
11	PLATE-INSPECTION,Crosshead	2	RM-200PZG052
12	SCREW,Crosshead Inspection Plate	10	RM-655EE060
13	HOUSING-BEARING COVER(Жёсткий Side)	1	RM-201PZG253
14	SCREW,Подшипник Retainer Plate	12	RM-655EG050
15	HOUSING-BEARING,Eccentric	2	RM-200PZG006
16	GASKET,Подшипник Крышка Plate	2	RM-201PZG715N
17	PLATE-BEARING COVER(Жёсткий Side)	1	RM-200PZG315
19	SCREW,Подшипник Крышка Plate	48	RM-655EG070
20	GASKET,Inspection Plate	1	RM-25C1788N
21	PLATE-INSPECTION	1	RM-202FXT052
22	SCREW,Inspection Plate	6	RM-655EF050
23	GAUGE,Масло Уровень Sight	1	RM-40L17
24	GAGUE-TEMPERATURE	1	RM-27H11
25	BUSHING-PIPE	1	RM-6400
26	SLIDE-CROSSHEAD	6	RM-200PZG309
27	SCREW,Crosshead Slide to Frame	24	RM-75LM6
28	SEAL-FASTENER	12	RM-60DD35
29	LOCKNUT	24	RM-50V44

Description

CAMTOP Wireline Насос In Переводник / Насос In Tee

Wireline Pressure Control Equipment | Alloy Стальной | 5,000–15,000 PSI | H2S Service

Product Overview

The CAMTOP Wireline Насос In Переводник / Насос In Tee is an essential component of wireline pressure control equipment. It is installed below the ПВО stack and provides a high-flow connection path between the wellhead manifold and the wireline pressure-control assembly.

The pump-in tee features a side-outlet connection thread used to connect the wellhead manifold for large-volume flow. On the opposite side of the tee body, an NPT-threaded port is provided for a pressure release valve. Once the pressure release valve is installed, the assembly can be used to safely bleed off trapped pressure and ensure safe wireline operations.

The pump-in sub is mainly composed of a union tee-body, union lower adapter, pressure gauge (manometer) port, and cock valve, making it a compact yet critical interface for pressure management at the wellhead.

Bore Diameter: 3.0″ (76 mm) and larger | Working Pressure: 5,000 – 15,000 psi | Material: Alloy Стальной | Service: Oil, gas, and H2S-containing fluids | Temperature: Up to 425°F (220°C)

Product Image

CAMTOP Wireline Насос In Переводник Насос In Tee — alloy steel wireline pressure control equipment

CAMTOP Wireline Насос In Переводник / Насос In Tee — high-strength alloy steel construction for wireline pressure control

Key Features

Устьевое оборудование Манифольд Connection: Side-outlet thread connects the wellhead manifold to provide a large-flow fluid path during wireline operations
Pressure Relief Provision: NPT-threaded port on the tee body accepts a pressure release valve for safe pressure bleed-off
Installed Below ПВО: Designed to be mounted directly beneath the wireline ПВО stack as part of the pressure-control assembly
High-Strength Alloy Стальной: Robust alloy steel construction for reliable pressure containment in high-pressure wireline service
Multiple Pressure Ratings: Available in 5,000 psi, 10,000 psi, and 15,000 psi working pressure classes
H2S / Sour Service Compatibility: Suitable for crude oil, water, natural gas, and H2S/CO2-containing environments
High-Temperature Service: Rated for working temperatures up to 425°F (220°C)
Compact Integrated Design: Includes union tee-body, union lower adapter, gauge port, and cock valve in one assembly
API / ISO Quality: Manufactured in accordance with recognized oilfield pressure-control equipment standards

Technical Specifications

Item	Specification
Product	CAMTOP Wireline Насос In Переводник / Насос In Tee
Material	Alloy Стальной
Bore Diameter	3.0″ (76 mm) and larger sizes available
Working Pressure	5,000 psi / 10,000 psi / 15,000 psi
Working Temperature	Up to 425°F (220°C)
Working Medium	Crude oil, water, natural gas, and fluids containing H2S/CO2
Main Components	Соединение tee-body, union lower adapter, manometer port, cock valve
Pressure Relief	NPT port for pressure release valve
Application	Oil and gas well wireline pressure control operations
Design Standard	API / ISO oilfield wireline equipment standards

Насос In Переводник Model Selection Table

Model	Working Pressure (psi)	ID (mm)	Side-out Connection	Main Connection
ST12-35	5,000	120	2″-1502 WE CO / 3″-1502 WE CO	7-3/4″ – 4 ACME
ST12-70	10,000	120	9″-4 ACME	7-3/4″ – 4 ACME
ST12-105	15,000	120	11-1/8″-4 ACME	7-3/4″ – 4 ACME
ST13-35	5,000	130	7-3/4″-4 ACME	7-3/4″ – 4 ACME
ST13-70	10,000	130	9″-4 ACME	7-3/4″ – 4 ACME
ST13-105	15,000	130	12-1/2″-4 ACME	7-3/4″ – 4 ACME
ST14-35	5,000	140	7-3/4″-4 ACME	7-3/4″ – 4 ACME
ST14-70	10,000	140	Tr240X6	7-3/4″ – 4 ACME
ST14-70T	10,000	140	8-1/4″-4 ACME	7-3/4″ – 4 ACME
ST16-35	5,000	160	9-1/2″-4 ACME	7-3/4″ – 4 ACME
ST16-70	10,000	160	11-1/2″-4 ACME	7-3/4″ – 4 ACME
ST16-70T	10,000	160	9-5/8″-4 ACME	7-3/4″ – 4 ACME
ST18-35	5,000	180	9-5/8″-4 ACME	7-3/4″ – 4 ACME
ST18-70	10,000	180	11-5/8″-4 ACME	7-3/4″ – 4 ACME

Note: Service environment for all models is crude oil, water, natural gas with H2S and CO2; working temperature is T-20 (-29°C to +121°C). Custom sizes, connections, and pressure ratings are available on request.

Applications

Wireline logging, perforating, and intervention operations
Устьевое оборудование pressure control during slickline and electric-line deployment
High-flow manifold connection below the wireline ПВО stack
Pressure relief and safe bleed-off of trapped well pressure
Sour-service (H2S/CO2-containing) wireline operations
High-temperature well environments up to 425°F
Offshore and onshore drilling / production wireline units

Ordering Information

When requesting a quote, please specify the following parameters so we can select the correct pump-in sub or pump-in tee configuration:

Model / Size: Bore ID (120 / 130 / 140 / 160 / 180 mm) and pressure rating (35 / 70 / 105 MPa)
Side-out Connection: ACME thread specification or union connection type
Main Connection: Нижний adapter thread to match ПВО or lubricator stack
Pressure Relief Requirement: With or without NPT pressure release valve
Service Environment: Standard or H2S / sour service
Working Temperature: Ambient or high-temperature service
Quantity Required: For pricing and delivery schedule

Why Choose CAMTOP

Specialized manufacturer of oilfield wireline pressure control equipment
Alloy steel construction with full material traceability
Multiple bore sizes and pressure ratings available
API / ISO quality management and inspection procedures
Application engineering support for ПВО stack and manifold integration
Competitive pricing with fast delivery from China

Contact Us

For pricing, technical support, or to place an order, contact CAMTOP directly:

Email: sales@cposl.com

WhatsApp / Phone: +86 186 2172 3891

Address: Shanghai, China

CAMTOP TPD600 Триплексный насос | 600 HP, 15K PSI, Cementing

Description

Product Overview

Key Features & Advantages

Technical Specifications — Main

Intermittent Well Service Ratings

Spare Parts Kits by Plunger Size

Комплект — Spare Parts, TPD600, 2 3/4″

Описание

Буровой насос Манометр YK-100

Description

Болт, P/N: 1198328 MP-5

Description

F-500 Буровой насос

F-500 mud pump specification

Описание

Буровой насос Манометр YK-150

Description

BOMCO drilling pump F-800

Description

BOMCO drilling pump F-1600

Description

Key Features

Technical Specifications

Bill of Materials — Триплексный насос Гидравлическая часть В сборе (Typical)

Description

Description

Product Overview

Product Image

Key Features

Technical Specifications

Насос In Переводник Model Selection Table

Applications

Ordering Information

Why Choose CAMTOP

Contact Us