Description
GILL Model 600 Power Tubing Ключ
1-5/16″ to 6-5/8″ | High Torque 15,000 ft-lbs | Two-Speed Power Shift
Product Overview
The GILL Model 600 Power Ключ is a safe, accurate, and reliable unit for the makeup and breakout of tubing and casing from 1-5/16″ to 6-5/8″ OD. Featuring a closed head design, two-speed power shift transmission, and pressurized oil bath lubrication, the Model 600 delivers consistent high-torque performance with reduced maintenance requirements in demanding oilfield operations.
Size Range: 1-5/16″ to 6-5/8″ (33.3mm to 177.8mm) | High Torque: 15,000 ft-lbs @ 2,000 psi | Weight: 2,100 lbs (953 kg) with backup tool & transport rack
В сборе Drawing — Final Drive
GILL Model 600 Final Drive В сборе — For reference only
В сборе Drawing — Transmission
GILL Model 600 Transmission В сборе — For reference only
Key Features
- Closed Head Design: Ключ remains in position during the entire trip, reducing makeup and breakout time
- Power Shift Transmission: Enables operator to change gears during tong operation without stopping
- Two-Speed Operation: High gear (76 rpm) for speed, Low gear (11 rpm) for maximum torque of 15,000 ft-lbs
- Pressurized Oil Bath Lubrication: Ensures uniform lubrication of all transmission components for extended service life
- Adjustable Clutch: Extends the life of transmission components with field-adjustable settings
- Direct Motor Drive: Minimizes power loss with improved drive alignment for quieter, more efficient operation
- Roller Chain Final Drive: Robust and serviceable power transmission system
- Split Guide Кольцо: Provides easier and safe access to jaws and final drive gear components
- Controlled Torque: Adjustable relief valve for precise makeup torque control
- Versatile Jaw Sets: Wide range of jaw sets available for 1-5/16″ through 6-5/8″ tubing and casing
Technical Specifications
| Item | Specification |
|---|---|
| Model | GILL Model 600 |
| Size Range | 1-5/16″ to 6-5/8″ (33.3 mm to 177.8 mm) |
| High Torque @ 2,000 psi | 15,000 ft-lbs (20,340 Nm) — Low Шестерня |
| Standard Torque @ 2,000 psi | 12,000 ft-lbs (16,272 Nm) — Low Шестерня |
| High Torque — High Шестерня | 2,500 ft-lbs (3,390 Nm) |
| Speed — High Шестерня | 76 rpm @ 33.5 gpm (127 LPM) |
| Speed — Low Шестерня | 11 rpm @ 33.5 gpm (127 LPM) |
| Weight (with backup & rack) | 2,100 lbs (953 kg) |
| Max System Pressure | 2,500 psi |
| Recommended Operating Pressure | 2,200 psi (relief valve setting) |
| Transmission Type | Power Shift, Two-Speed |
| Final Drive | Roller Chain |
| Lubrication | Pressurized Oil Bath (28 Qt capacity, API MS 30W) |
| Design | Closed Head with Split Guide Кольцо |
Torque Performance
| Шестерня | Speed (rpm) | Std. Torque | High Torque |
|---|---|---|---|
| Low Шестерня | 11 rpm | 12,000 ft-lbs | 15,000 ft-lbs |
| High Шестерня | 76 rpm | ~1,600 ft-lbs | 2,500 ft-lbs |
All torque values at 2,000 psi (138 bar) with 33.5 gpm flow rate. Based on Commercial M37X motor with 1.750″ gear width at normal oil temperature and viscosity.
Main Components
| В сборе | Description |
|---|---|
| Ключ Case & Final Drive | Closed head design with split guide ring, roller bearings, drag ring assembly with jaw pins and drag plugs |
| Transmission | Two-speed power shift with adjustable clutch, ring gear cover, end plate, and pressurized oil bath |
| Clutch В сборе | Rockford-style adjustable clutch with slipper sleeve, adjustment collar, and anchor pin |
| Гидравлический System | Commercial M37X motor, torque control relief valve, operating valve with shifting lever |
| Гидравлический Lift (L600A) | Пружина-cushioned lift cylinder, 6 feet of travel, hydraulic lines with self-sealing couplings |
| Backup Инструмент (BU600-A) | Wide jaw design reduces expendable cost by 75%, compatible with full jaw set range |
Jaw Sets & Size Range
Complete range of jaw sets available to cover 1-5/16″ through 6-5/8″ OD tubing and casing:
- 1″ Pins — Single Acting Jaws: 2-3/8″ to 6-1/16″ OD range with drag ring assemblies and jaw inserts
- 1″ Pins — Double Acting Jaws: 2-3/8″ to 4-1/2″ OD range for makeup and breakout without jaw reversal
- 1-1/4″ Pins — Backup Инструмент Jaws: 2-3/8″ to 3-11/16″ OD range for BU600-A backup tool
- Jaws are reversible — inserts can be turned around when worn to extend service life
- Drag ring assemblies available in multiple bore sizes with 1″ or 1-1/4″ jaw pins
Operation Highlights
- Makeup/Breakout: Jaws placed with “M” facing up for makeup, “B” facing up for breakout
- Torque Control: Adjustable relief valve on operating valve for precise makeup torque settings
- Power Shift: Change gears during operation without stopping the tong
- Safety: Anchor arm must be attached to anchor post before operation. Keep hands clear of tong head
- Installation: Пружина-cushioned hydraulic lift with 6 ft travel, torque arm at 90° to power source
Why Choose CAMTOP?
CAMTOP (Shanghai) Machinery Equipment Co., Ltd. is a trusted supplier of oilfield handling equipment with extensive industry experience. Our GILL Model 600 compatible power tongs deliver the same reliable performance and durability that the industry has depended on for decades.
- ISO 9001 certified quality management system
- Full range of jaw sets and spare parts available
- Complete technical documentation and support
- Competitive factory-direct pricing with global shipping
- Wide Jaw Backup Инструмент included — reduces expendable costs by 75%
Contact Us
For pricing, jaw set selection guidance, and spare parts inquiries, please contact our sales team:
Email: sales@cposl.com
Phone: 86-18621723891
Web: www.camtop-oilfieldtools.com
Address: No. 432, Fute North Road, Pudong District, Shanghai, China
