Description
Элеватор/Спайдер
The 350 and 500 Ton Casing Элеватор/Спайдер Units are pneumatically operated power tools, capable of handing casing sizes from 4.1/2 to 24 1/2 inches, with string loads of 3150Kn for the 350 ton unit, 4500Kn for the 500 ton unit, 6672Kn for the 750 ton unit.
These units have been refined and incorporate such engineering features as air powered operation with safety latch, and four independent slips, as standard equipment.
The main bodies can be dressed as a casing elevator or spider. The elevator consists of an upper unit using a bell guide and bottom guide. The lower unit is dressed as a Спайдер with a top guide that centers the Спайдер over the master bushing.
The elevator is attached to the derrick traveling block and hook with 350 or 500 ton standard API links. The Спайдер locates directly on the pin drive master bushing (27.1/2 MSPC, 37.1/2 and 49.1/2 MPCH), and square drive master bushing (27.1/2 MSS), and will accommodate any other master bushing when used with an Переходник Plate of CAMTOP.
| Model | Applicable diameter of tubular(in) | Rated capacity | Work pressure | Max pressure |
|---|---|---|---|---|
| (tons) | (MPa) | (Mpa) | ||
| SE150 | 2-3/8″ ~ 5-1/2″ | 150 | 0.6-0.8 | 1 |
| SE350 (14) | 4″ ~ 14″ | 350 | 0.6-0.8 | 1 |
| SE500 (20) | 16″ ~ 20″ | 350 | 0.6-0.8 | 1 |
| SE500 (14) | 4″ ~ 14″ | 500 | 0.6-0.8 | 1 |
| SE500 (24-1/2) | 16″ ~ 24-1/2″ | 500 | 0.6-0.8 | 1 |
| SEB350 | 4-1/2“ ~ 13-3/8″ | 350 | 0.6-0.8 | 1 |
